2007 Project
Well, this project has been going on for sometime now and it is time to start it before its too late. (familly time, regulations, money...)
This car will be engineered like an insect, the outer composite shell is structural and no chassis will be used. The suspensions will be bolted to structural bulkheads and the engine will be mounted on the difuser (aft underbody channels).
I bought a Renault V6 12v turbo engine (200Hp updraded to 300HP) and it will be mounted in the back of the supercar. The car should weight about 720Kg.
General view:
Front face (not complete):
Back of the car (not final):
3D model started:
I used Maxsurf to design the main body then Rhino3D to modify the shape, trim, add details etc... I am not good enough in 3D to 'feel' the curvatures and a full scale mock-up is necessary to modify on-site the final shape.
Note: I am seeking for a set of 18-19' alloy wheels. (Renault mégane RS or silimar)
This car will be engineered like an insect, the outer composite shell is structural and no chassis will be used. The suspensions will be bolted to structural bulkheads and the engine will be mounted on the difuser (aft underbody channels).
I bought a Renault V6 12v turbo engine (200Hp updraded to 300HP) and it will be mounted in the back of the supercar. The car should weight about 720Kg.
General view:
Front face (not complete):
Back of the car (not final):
3D model started:
I used Maxsurf to design the main body then Rhino3D to modify the shape, trim, add details etc... I am not good enough in 3D to 'feel' the curvatures and a full scale mock-up is necessary to modify on-site the final shape.
Note: I am seeking for a set of 18-19' alloy wheels. (Renault mégane RS or silimar)
posted by Speedy at 2:16 PM
0 Comments:
Post a Comment
<< Home